I. Performance

The S355MC alloy steel, as a typical representative of high-strength low-alloy structural steel, possesses high strength, good plasticity, toughness, and excellent welding properties.

• The yield strength is not less than 355 MPa

• The tensile strength is within 430 - 550 MPa

• The elongation rate is usually 19%

• The density is approximately 7.85 g/cm³

• The specific heat capacity is approximately 460 J/(kg·℃)

• The thermal conductivity is approximately 50 W/(m·K)

• The thermal expansion coefficient is 11.5×10⁻⁶/℃

II. Chemical Composition

• Carbon (C) content ≤ 0.12%. The appropriate carbon content ensures that the steel has sufficient strength without compromising its toughness due to excessive carbon content;

• Silicon (Si) ≤ 0.50%, which enhances the strength and hardness of the steel;

• Manganese (Mn) ≤ 1.50%, which increases the strength and hardenability of the steel plate;

• Phosphorus (P) ≤ 0.025%, which prevents the reduction of the steel's toughness and welding performance;

• Nickel (Nb) ≤ 0.09%, which avoids reducing the steel's toughness and welding performance;

• Aluminum (Alt) ≥ 0.015%

• Vanadium (V) ≤ 0.20%

• Titanium (Ti) ≤ 0.15%

III. Application Areas

1. Construction Field

The S355MC alloy steel plate, with its high strength, effectively reduces the overall weight of steel beams. Compared to traditional steel materials, while ensuring the bridge's carrying capacity, the weight of the steel beams has been reduced by 12%, significantly reducing the construction cost and difficulty of bridge piers. Moreover, its excellent welding performance enables the construction team to efficiently complete the steel beam assembly work, shortening the construction period of the bridge by 15%, and effectively guaranteeing the smooth progress of the project.

2. Mechanical Manufacturing

A large-scale heavy machinery manufacturing enterprise in China adopted the S355MC alloy steel plate in the manufacturing of the cabin of a new generation of mining dump trucks. The cabin not only reduced its weight by 20%, effectively improving the fuel economy of the vehicle, but also demonstrated excellent performance in resisting impact and wear during the transportation of minerals, with a 30% increase in its service life. The enterprise's manager stated that after using the S355MC alloy steel plate, the product's competitiveness in the international market has significantly improved, and the order volume has increased by 25%.

3. Green Manufacturing

The manufacturing enterprise optimized the smelting process to reduce energy consumption and carbon emissions in the production process, making the S355MC alloy steel plate not only meet high-performance requirements but also better align with the current sustainable development requirements. According to relevant data, the S355MC alloy steel plate produced using the new process has a 18% reduction in carbon emissions per unit output compared to the previous process, providing strong support for the industry's green transformation.

IV. Notes

1. Processing

During cutting and welding, it is necessary to strictly control the process parameters. If the cutting speed is too fast, the quality of the cut may deteriorate. When welding, it is necessary to select matching welding materials and adjust the welding current and voltage according to the thickness of the steel plate and the welding position to avoid welding defects.

2. Storage

It should be stored in a dry and ventilated environment. It should be kept away from corrosive substances to prevent the steel plate from rusting and affecting its performance.

3. Usage

It is essential to conduct quality inspections on the steel plate, including mechanical property tests and chemical composition analysis, to ensure that it meets the engineering requirements and to prevent potential safety hazards caused by the quality issues of the steel plate.

V. Conclusion

In response to the growing market demand for high-performance steel, many steel enterprises have announced the expansion of the production scale of S355MC alloy steel plates and increased investment in research and development, aiming to further enhance the performance of the steel plates. Industry experts point out that in the future, S355MC alloy steel plates are expected to be applied in more emerging fields, such as marine engineering and aerospace auxiliary equipment, continuously leading new trends of industry upgrading and contributing to the advancement of China's manufacturing towards higher-end and greener standards.

VI. About Bolaibao

Bolaibao closely follows the green development trend of the industry, continuously invests in research and development resources, optimizes the production process of S355MC alloy steel plates, and reduces energy consumption and pollution emissions. Through technological innovation, it has achieved a 15% reduction in unit product energy consumption and a 20% reduction in exhaust emissions, becoming a model of green transformation for local steel enterprises and promoting the industry to steadily move towards a sustainable direction.

• Contact us for detailed information and tailored solutions!

Tel: +86 15366282159

Email: sale@bolaibao1.com

Website: www.blbszmetal.com